General of insulation piercing connector (IPC) 
1.1 Piercing connector ,silnple installation ,need not strip the cable coat .
1.2 Moment nut ,piercing pressure is constant keep good electric connection and make no damage to lead .
1.3 Self-seam frame wetproof ,waterproof and anti-corrosion , extend the using life of insulated lead and connectoion .
1.4 Adopted special connecting tablet ,apply to joint of Cu(Al)and Cu(Al)or Cu and Al .
1.5 Small electric connecting resistance ,connecting resistance less than 1.1 times of the resistance of branch conductor with the same length .
1.6 Special insulated case body ,resistandce to illumination and environmental aging ,the insulation strength can up to 12KV .
1.7 Arc surface design ,apply to connection with the same(different)diameter ,wide connection scope(0.75mm2-400mm2) . 

(Performance testing )
2.1 Mechanical perfonnance：the grip force of the wire clamp is 1/10 bigger than the break force of the lead .It comply with GB2314-1997 .
2.2 Temperature rise performance：under the condition of big current ,the temperature rise of connector is less than that of connection lead .
2.3 Heat circle performance：conforms to GB/T2317.3-2000 ,the heat circle trial standard for electric fitting .
2.4 Waterproof insulation perfonnance：conforms to the relevant requirements in Part 2 of GB/T13140.4-1998 .
2.5 Resistance to corrosion performance：under the condition of SO，and salt fog ,it can do three times of fourteen days circle testing .
2.6 Environmental aging pelformance：under the circumstance of ultraviolet ,radiation,dry and moist ,expose if with change of temperature and heat impulse for six weeks .
2.7 Fire-proofperformance：insulation material of the connector withstands glowing filament test .Conform to the requirements in Chapter4-10 of GB/T5169.4 . 

The reason of choosing insulation piecring connector (IPC)
3.1 Simple installation
Con be branch of cable without striping the insulated coat and the joint is completely insulated .Make branch in the random locations of cable without cutting off the main cable .Simple and reliable installation , just need sleeve spanner ,can be installed with on live line .
3.2 Safe use
The joint has good resistance to distortion ,quake ,fire ,wet ,electrochemfical corrosion and aging , need no main tenance .Has been used success fully for 30 years .
3.3 Economical cost
Small installation space ,save the cost of bridge and land construction .In stnlctural application ,there need no terminal box ,junction box and return wire of cable ,save cable cost .The cost of cables and clamps is lower than other power supply system .